Flat Bed Die

Small-space cooling systems require low airflow resistance for efficient heat transfer. Our Flat Bed Die is designed specifically for these applications. It is compatible with 300 and 350 fin forming machines and works with 0.1–0.35 mm aluminum and 0.1–0.25 mm copper.

The flat surface structure reduces airflow resistance, making it suitable for small refrigeration units and compact cooling systems.

The die is manufactured using high-quality materials. The upper die is made of Cr12MoV steel with a hardness of HRC58–62. The lower die is equipped with a wear-resistant plate to ensure long service life.

Our factory has 18 years of manufacturing experience and operates with 41 skilled employees under strict quality standards. We cooperate with companies such as BYD and Zhejiang Yinlun, who value the stability and reliability of our dies. This Flat Bed Die provides low-resistance performance.

Simple Line for Easy Operation

The production line is simple, stable, and efficient. The die is installed at the stamping station of the fin forming machine. The coil is fed from the unwinder into the forming area.

 

The system operates with a stamping force of 150–200 kN and completes fin forming in a single step. Fin thickness is determined by the material thickness. A servo cutter is used to cut fins to the required length. Fin width ranges from 30–345 mm.

 

The structure is flat without pitch design, making it suitable for straightforward production requirements. This Flat Bed Die supports efficient and easy operation.

Simple Design for Easy Use

This die is designed for practicality and ease of use. Its simple structure reduces maintenance requirements, and die change can be completed in less than 20 minutes.

The flat surface design reduces dust accumulation, lowering cleaning costs by up to 40%. Airflow resistance is reduced by approximately 30% compared to other fin structures, making it suitable for low-speed airflow applications.

The die is compatible with different material thicknesses and does not require frequent parameter adjustments, making it suitable for small-batch production with varying specifications. New operators can be trained in under one hour, significantly reducing training costs.

We provide a one-year warranty, 24/7 service response, and support sample testing and operator training. This Flat Bed Die has been supplied to over 20 countries with 18 years of application experience.